• Non-Leaching Antimicrobial Products
• Promotes the long-term reduction of harmful bacteria, mold, and fungi on surfaces.
• Minimizes the presence of microbes on touch points that can serve as transfer routes for bacteria from surface-to-skin.
• Generates an environmentally friendly, non-leaching antimicrobial products barrier on surfaces that is non-toxic, and non-sensitizing to human skin.
• One application proactively and continually fights the growth of bacteria, mold and fungi on surfaces for up to 90 days.
• Proactively and continually prevents odor, staining and deterioration caused by bacteria, fungi, mold and mildew.
• Can be safely and easily applied without affecting day-to-day operations.
• Invisible, odorless and will not affect the appearance or performance of treated surfaces.
• Will not create adaptive organisms or “super bugs”.

*Using SurfaceAide® XL

Step 1: Clean and Disinfect Surface

• Prior to the application of the SurfaceAide® XL, all surfaces must be thoroughly cleaned to remove gross dirt, debris, and build-up.
• If necessary, use a soft bristle broom, brush, no-lint wash rags, microfiber dust pad, and vacuum cleaner to prepare the surfaces.
• Before the selected surfaces are treated with SurfaceAide® XL, surfaces must be thoroughly disinfected using SurfaceClean™ or a comparable disinfecting product.

Step 2: Apply SurfaceAide® XL

• Adjust spray nozzle to the lightest mist spray setting that will provide an even coating.
• Spray surfaces using a side to side motion or up and down motion to ensure an even coating is applied.
• Allow the spray to cure for at least three (3) minutes then wipe down the sprayed surfaces using a no-lint rag to remove any excessive spray and to ensure all surfaces have been thoroughly treated.

Option 2: Bucketless Mop/Pad Use: Mats, floor surfaces, etc.

• Ensure the bucketless mop tank is clean prior to use.
• Fill the mop tank to the desired level to accommodate surfaces to be treated. Do not add water or other cleaning agents.
• Place a clean pad on the frame of the mop unit.
• Keep the pad soaked at all times but not dripping.
• Mop the surfaces in a straight line working from one end to the other with a slight overlap.
• Check the condition of the pad on a regular basis. Replace pad if it becomes significantly dirty.
• Mop surface to leave a consistent light coat on all surfaces ensuring no areas are left untreated.
• Allow surfaces to fully cure until dry.

Option 3: Pump Sprayer

• Ensure the pump sprayer tank and hose is clean prior to use.
• Fill pump sprayer tank to the level required for treating surfaces (16 oz. for every 200 square feet). Do not add water or other cleaning agents.
• Adjust spray nozzle to the lightest mist spray setting that will provide an even coating.
• Spray surfaces using a side to side motion or up and down motion ensuring all surfaces have an even coating.
• Allow the spray to cure for at least three minutes then wipe down the sprayed surfaces using a no-lint rag to remove any excessive spray and to ensure all surfaces have been thoroughly treated.
• When treating carpets with non-leaching antimicrobial products, adjust the spray to allow proper wetting of the carpet. Apply as described above and let carpet dry.

Use: Large surface areas to be treated at one time, such as multiple tables, fitness equipment, benches, lockers, carpet etc.

Back To Top

Step 3: Surface Drying

SurfaceAide® XL must dry and cure on the surface before it can start providing antimicrobial protection. Allow 6-8 hours before resuming normal use of the treated surface. SurfaceAide® XL will not be negatively affected by the use of commercial cleaners or disinfection practices.

Become a Distributor of Non-leaching Antimicrobial Products

As a distributor of SurfaceAide® XL, you will be able to offer your customers the world’s most environmentally friendly and durable antimicrobial product. SurfaceAide® XL has a proven history of success in industries that include, but are not limited to health care, sports, education and military. Its unique antimicrobial characteristics and innovative product design will deliver solutions to the many serious issues that can be caused by bacteria, mold and fungi. Coating Specialists’ has an experienced team dedicated to supporting its distribution partners with:

• Product training.
• Customized marketing collateral.
• Promotion of SurfaceAide® XL in media outlets targeted at your customers.
• A distributor website with easy access to technical data, sales material and the latest news on the effects of microbial contaminants in the industries you serve.

Back To Top

Private Label Opportunities

Coating Specialists has the capacity and resources necessary to make SurfaceAide® XL private labeling a tremendous opportunity for you. A private label agreement allows you to introduce an innovative new technology under your brand, offer competitive pricing, and control distribution. Our team will work with you to ensure the process is efficient and quality and regulatory standards are met.

FAQ